How to Transition Flooring From One Room to Another

In a perfect world, your flooring would flow seamlessly from room to room. Hardwood flooring, for example, would flow continuously from living room to bedroom to kitchen to bathroom.

In the real world, however, you cannot help but transition from one flooring type to another because different rooms need different types of flooring. For example, the Brazilian cherry works great in the living room, but you must transition to porcelain in the bathroom due to moisture issues. To accommodate these shifts from one type of flooring to another, the flooring industry uses several different types of accessory items called transition strips.

Transitions Between Similar Floors

If you are transitioning from one type of flooring to the same type (e.g., ceramic to ceramic), it may be possible to have them meet without a transition strip, especially if they are the same thickness. But a transition usually is a better option. For one thing, seams are often incorporated between rooms of like materials to provide for expansion and contraction. A transition strip covers the expansion gap for each material. Also, unless the two floors happen to blend in an aesthetically pleasing way, you'll probably want the visual break provided by a transition.

Spaces Images / Getty Images

Transitions Between Different Materials

If you are dealing with two different types of floor coverings, a transition strip is almost always required. Each material needs some kind of finish along its edge, and different materials often create a change in floor height as well as changes in underfoot characteristics (for example, soft, yielding carpet transitioning to cold, rigid tile).

You may think that the less noticeable a transition is the better, but usually that is not the case. Clearly visible transitions are safer because the person walking toward them can see and anticipate the change in flooring elevation or feel, and this helps to prevent accidents.

Fortunately, transition strips are no longer just those aluminum strips. You can purchase a variety of genuine hardwood transitions, even if the floors you are connecting are not wood. For laminate flooring, for example, you can purchase hardwood transition strips that look just like your laminate.

  • Carpet to Tile Transition

    The Spruce / Margot Cavin

    This transition strip is designed to join low-pile carpet to a ceramic tile floor. This style makes use of an invisible aluminum strip tucked under the edge of the carpet, with upward-protruding spikes that grip the carpet. The adjoining ceramic tile butts up against this aluminum track but does not attach to it. Finally, a vinyl transition strip is snapped into a track in the aluminum strip, bridging both floors and covering the edges.

  • 4-In-1 Transition Strip

    The Spruce / Margot Cavin

    A 4-in-1 transition strip is the Swiss Army Knife type of transition strip, with interchangeable parts that work for different types of floors. A typical 4-in-1 transition includes a metal channel for mounting the system, with a T-molding, which fits into the channel and is used alone if you are joining floors that are the same height. For other situations, different pieces are used in conjunction with the T-molding:

    • Carpet Strip: Transition from carpet to another material.
    • Hard Surface Reducer: Transition from a thick hard flooring (such as hardwood or tile) to a thinner hard flooring, such as vinyl.
    • End Molding: Create a final finished edge on one floor material, rather than to transition between two floors
  • T-Strip for Hard Surfaces

    The Spruce / Margot Cavin

    This T-shaped aluminum transition strip will work to link any two hard-surface floors of the same height. Installation involves willing the joint between floors with a special sealant, then forcing the vertical portion of the T down into the gap, where it bonds with the sealant. The top reveal area of the T fits snug against the surface of the flooring—tighter than with any any other type of transition strip.

    Although these transition strips are available in several colors, you may find it hard to find an aesthetic match that looks good with both floors.

  • Tile-to-Laminate Transition

    The Spruce / Margot Cavin

    This transition strip is designed for joining a laminate floor to a tile floor. The hardwood strip is unfinished, and can be stained to match the color of the laminate flooring. Ceramic tile floors tend to be higher than laminate floors because tile is installed over cement board, while laminate usually lies over a thin foam underlayment. This transition strip features molding with offset grooves to match the differing thicknesses of the flooring.

    Installation involves mounting a metal channel with expandable anchors embedded in the subfloor between floors, then snapping the finish molding into place over the surface flooring.

    Continue to 5 of 7 below.

  • Wood-to-Wood Seam Binder

    The Spruce / Margot Cavin

    Usually called seam binders, these wide (about 5 inches) transition strips are flat strips of hardwood with beveled edges, used to bridge two wood floors of equal heights. A seam binder is installed by simply positioning the strip over the seam, then driving screws through pre-drilled pilot holes in the strip to secure it to the subfloor in the gap between the floors. Because it is attached to neither floor, each floor can expand and contract without cracking the transition strip.

    Seam binders are available in different widths. Most are sold unfinished, so you can stain them to match your flooring.

    Tip

    Wood transition strips are easy to customize, and any damage can be hidden or fixed through filling, sanding, and staining.

  • Vinyl to Tile Transition

    The Spruce / Margot Cavin

    This hardwood transition strip is shaped to make smooth transition from a lower vinyl floor upward to a thicker ceramic or stone tile floor.Much like the tile-to-laminate strip, this one reduces from a higher tile floor covering to a lower vinyl floor. In almost every case, vinyl will be lower than laminate.

    Installation involves anchoring a metal channel to the subfloor using screws an expansion anchors, then snapping the top strip into the channel to cover the seam between floors. The hardwood strip is left unfinished, so you can stain or paint it to match your flooring.

  • Carpet Edge Gripper

    The Spruce / Margot Cavin

    A carpet edge gripper is an aluminum strip that holds the edge of carpet with sharp metal teeth. It is used to transition to any adjoining surface that is lies lower the carpet.

    An edge gripper is installed by being tacked to the subfloor. Then, the carpet is forced into the toothed side of the strip, which holds the carpet backing much the way tackless strips are used to secure a carpet around the perimeter of a room.

How to Transition Flooring From One Room to Another

Source: https://www.thespruce.com/guide-to-basic-floor-transition-strips-1821708

0 Response to "How to Transition Flooring From One Room to Another"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel